The 3D view isn’t available right now. Here is the top view.
The app was updated. Reloading the page…
Its files couldn’t be loaded. Reload the page; if that doesn’t help, check your connection.
Your browser can’t start WebGL right now. The 3D view comes back by itself once it can; if it doesn’t, restart the browser (Chrome switches WebGL off after a graphics crash) and check that hardware acceleration is on.
Your browser can’t start WebGL right now. Restarting the browser usually helps (Chrome switches WebGL off after a graphics crash); also check that hardware acceleration is turned on.
It stopped with an error. Try again; if it keeps happening, reload the page.
Details
The cutting plan appears once the preview is ready.
The cutting plan can’t be built right now. The 3D view still shows your design.
Cut Score No score lines Engrave Gluing guide
About this laser cut file
A band with the name runs across it, and an ornament with a heart completes the design: a sign for a nursery door, a birthday table or a gift.
Build it as one piece, with the name cut into the band, its letters joined to the rails, or engraved on it, or layered, with the name glued on a frame across the band. Hang it from a hole or stand it in a base plate.
How it works
-
Type the name for the band of the unicorn sign.
-
Pick the construction: One piece (Cut out or Engraved) or Layered, with the name glued on a frame across the band.
-
Set the width under Size, from 1.97 to 23.62 in. The name’s joints, the hanging hole and the stand’s tabs keep their size. Smaller than drawn, the artwork’s thinnest lines and the name’s finest strokes are made a little bolder so they still cut cleanly.
-
The name settles onto the band. Under Mount, give it a hanging hole or a stand.
-
Turn the unicorn in the 3D view, check the cutting plan and download the SVG.
What’s in the file
- One sheet with every piece: the sign, the name to glue on when layered, and the slotted base plate for a stand.
- Everything the laser cuts, the engraving of an engraved name, and the score lines and gluing guide when they are on.
- An SVG at its true dimensions, ready for the laser.
- Templates: save the sign’s settings once and reuse them for each new name.
- SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
- PNG for raster engraving: the engraving alone - the score lines, the engraved areas and the gluing guide black on transparent at 600 dpi, as large as the sheet, so imported true to size it lies exactly on the SVG’s cut lines.
- PDF to print and proof: the same lines as vectors, true to size, every kind of line on a layer of its own - printed at 100 %, it shows the real size.
- AI for Illustrator: the same file as the PDF, which Illustrator opens as its own document, every kind of line on a layer of its own.
- DXF for CAD programs and RDWorks: the lines on the layers CUT, SCORE, ENGRAVE and GUIDE, in mm.
- STL to 3D print the design: the pieces as solids at their thickness - with several parts a ZIP with the whole piece and one STL per part.
- With Batch, several names at once: a ZIP with one file per name, or one sheet with all of them.
Questions
What happens to letters that reach out of the band?
They keep their full shape. The descender of a g, j, p or y, a swash or a tall capital lies on the artwork, welded to it, while the rails and the ring of the sign stay whole. Switch on Score overlaps to score the letter’s edge where it crosses the artwork.
One piece or Layered: which should I pick?
One piece is cut from a single sheet: Cut out sets the name into the band, its letters joined to the rails, Engraved engraves it on a frame across the band. Layered cuts the name as its own piece and glues it onto a frame across the band, in a second material.
Can I hang it or stand it up?
Yes. Under Mount, choose Hole for a loop on top that takes a ribbon, a cord or a hook, or Stand: the sign gets a straight bottom with tabs that slot into a flat base plate. Set the thickness to your sheet so the slots fit; it is always one or the other, a hole or a stand.
Can I make one for every name on a list?
Yes. Choose “Batch” above the first text and paste your list, one piece per line, up to 100. Every line becomes its own piece: download a ZIP with one file each, or one sheet with all of them.