The 3D view isn’t available right now. Here is the top view.
The app was updated. Reloading the page…
Its files couldn’t be loaded. Reload the page; if that doesn’t help, check your connection.
Your browser can’t start WebGL right now. The 3D view comes back by itself once it can; if it doesn’t, restart the browser (Chrome switches WebGL off after a graphics crash) and check that hardware acceleration is on.
Your browser can’t start WebGL right now. Restarting the browser usually helps (Chrome switches WebGL off after a graphics crash); also check that hardware acceleration is turned on.
It stopped with an error. Try again; if it keeps happening, reload the page.
Details
The cutting plan appears once the preview is ready.
The cutting plan can’t be built right now. The 3D view still shows your design.
Cut Score No score lines Engrave Gluing guide
About this laser cut file
Large open cells like a garden trellis fill its slanted post, and its foot rises in an arch between its two ends.
It lets the photo float.
The two halves slot together crosswise and hold each other without glue. The slots are drawn for your sheet: enter its thickness and how much your laser burns away, and the halves push together snugly, also when you stretch the stand deeper or slimmer.
How it works
-
Set the height under Size. With Keep proportions on, the depth follows; off, set the depth on its own, from 0.7 to 1.4 times as deep as the design is drawn.
-
Measure your sheet and enter its thickness and your kerf under Sheet.
-
Look at the assembled stand in 3D: Front shows one half straight on, Apart lifts one half off the other. Check the cutting plan, then download the SVG.
What’s in the file
- Cut lines for both halves, nested on one sheet at true size.
- Slots drawn one kerf narrower than your sheet, so after cutting they are exactly as wide as the sheet is thick and the halves slot together firmly.
- The slots keep their true width at every height and depth.
- Optional: both halves as a 3D model (STL), for a 3D viewer or a 3D printer.
- SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
- PNG for raster engraving: the engraving alone - the score lines, the engraved areas and the gluing guide black on transparent at 600 dpi, as large as the sheet, so imported true to size it lies exactly on the SVG’s cut lines.
- PDF to print and proof: the same lines as vectors, true to size, every kind of line on a layer of its own - printed at 100 %, it shows the real size.
- AI for Illustrator: the same file as the PDF, which Illustrator opens as its own document, every kind of line on a layer of its own.
- DXF for CAD programs and RDWorks: the lines on the layers CUT, SCORE, ENGRAVE and GUIDE, in mm.
- STL to 3D print the design: the pieces as solids at their thickness - with several parts a ZIP with the whole piece and one STL per part.
Questions
What does the trellis stand look like?
Large open cells like a garden trellis fill a slanted post, and the foot rises in an arch between its two ends, so the stand is mostly air.
Why do I need to enter the sheet thickness?
The two halves hold each other only through their slots. A slot that is too wide lets the stand wobble, one that is too narrow will not go together. Measure the sheet you will cut and enter it, and the slots are made for it.
What is the kerf and which value should I use?
The kerf is the width the laser beam burns away. Every slot is drawn one kerf narrower than the sheet, so after cutting it is exactly as wide as the sheet. 0.006 in is a good start for most lasers; a larger value makes the joint tighter, a smaller one looser. Cut one stand first to check.
Can I scale the file in my laser software?
Better not: scaling the file scales the slots too, and they no longer fit the sheet. Set the height and the depth here instead, from 1.65 to 14.17 in tall, and the slots stay matched to your sheet at every size.
Does it work with any sheet?
The slots fit any sheet from 0.039 to 0.47 in, but a thick sheet in a small stand can push the halves into each other where ornament sits close to the joint. The notes then say so and what to change.
How do I put the stand together?
Take the half whose slot opens at the top and slide the other half down into it, crosswise, until both stand flat on the table. The slots hold them; no glue is needed. Pull the halves apart again to store the stand flat.
What is the STL download for?
It is the stand as a 3D model: both halves laid flat, as thick as the sheet, with the slots exactly as wide as the sheet. Open it in a 3D viewer to check the stand, or print it on a 3D printer. For the laser, use the SVG.