The 3D view isn’t available right now. Here is the top view.
The app was updated. Reloading the page…
Its files couldn’t be loaded. Reload the page; if that doesn’t help, check your connection.
Your browser can’t start WebGL right now. The 3D view comes back by itself once it can; if it doesn’t, restart the browser (Chrome switches WebGL off after a graphics crash) and check that hardware acceleration is on.
Your browser can’t start WebGL right now. Restarting the browser usually helps (Chrome switches WebGL off after a graphics crash); also check that hardware acceleration is turned on.
It stopped with an error. Try again; if it keeps happening, reload the page.
Details
The cutting plan appears once the preview is ready.
The cutting plan can’t be built right now. The 3D view still shows your design.
Cut Score No score lines Engrave Gluing guide
About this laser cut file
A rounded headstone with a beveled edge leans in a mound of grass, a crack running down from its top, a bat perched on one corner with its wings spread and a grinning jack-o’-lantern resting at its foot.
The name is carved right across the stone.
Stand one at each place for a Halloween dinner, put one on the mantel with the family name, or make a whole row of them for a spooky party.
How it works
-
Write the name for the stone - Boris to begin - or a guest list under Batch.
-
Choose Layered, a gray stone on a black back, or One piece with the crack, the grass and an outline engraved.
-
Set the width from 3.54 to 9.84 in; it starts at 4.72 in and stands on its slotted base.
-
Keep the stand, swap it for a hanging loop or go without, then download the SVG.
What’s in the file
- Layered: the tombstone with its crack, bat and pumpkin engraved, the black back plate and the name to glue on.
- One piece: the bevel, the crack, the grass, the pumpkin’s face and an outline engraved, the name cut out or engraved.
- The stand: a base plate with slots, cut to your sheet’s thickness.
- With Batch: a tombstone per guest, as a ZIP or nested on a sheet.
- SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
- PNG for raster engraving: the engraving alone - the score lines, the engraved areas and the gluing guide black on transparent at 600 dpi, as large as the sheet, so imported true to size it lies exactly on the SVG’s cut lines.
- PDF to print and proof: the same lines as vectors, true to size, every kind of line on a layer of its own - printed at 100 %, it shows the real size.
- AI for Illustrator: the same file as the PDF, which Illustrator opens as its own document, every kind of line on a layer of its own.
- DXF for CAD programs and RDWorks: the lines on the layers CUT, SCORE, ENGRAVE and GUIDE, in mm.
- STL to 3D print the design: the pieces as solids at their thickness - with several parts a ZIP with the whole piece and one STL per part.
- With Batch, several names at once: a ZIP with one file per name, or one sheet with all of them.
Questions
Is the bat a separate piece?
No. The bat sits on the stone’s corner and the pumpkin leans on its foot, so the whole tombstone is one shape with its details engraved.
Can it say R.I.P.?
Yes: up to 12 characters fit the stone, such as R.I.P., a name, Boo or the year.
Can it hang instead of standing?
Under Mount, pick a hanging loop or no mount at all; the stand is where it starts.
Can I make one for every name on a list?
Yes. Choose “Batch” above the first text and paste your list, one piece per line, up to 100. Every line becomes its own piece: download a ZIP with one file each, or one sheet with all of them.