The 3D view isn’t available right now. Here is the top view.
The app was updated. Reloading the page…
Its files couldn’t be loaded. Reload the page; if that doesn’t help, check your connection.
Your browser can’t start WebGL right now. The 3D view comes back by itself once it can; if it doesn’t, restart the browser (Chrome switches WebGL off after a graphics crash) and check that hardware acceleration is on.
Your browser can’t start WebGL right now. Restarting the browser usually helps (Chrome switches WebGL off after a graphics crash); also check that hardware acceleration is turned on.
It stopped with an error. Try again; if it keeps happening, reload the page.
Details
The cutting plan appears once the preview is ready.
The cutting plan can’t be built right now. The 3D view still shows your design.
Cut Score No score lines Engrave Gluing guide
About this laser cut file
He beams under his red hat with its fluffy brim and pompom, a round rosy nose above a big curly mustache and beard, his red suit trimmed with white fur at the collar, the cuffs and the hem, black mittens gripping both rolled ends of the list and black boots below.
Layered, Santa is built from birch with the hat, the suit and the trousers in deep red, every bit of fur and the beard in white, black mittens and boots and a blush nose, and the name stands raised on the list. As one piece, the red and black parts are engraved dark, while the list, the beard and the fur stay light wood with their fine lines.
Proof for every child that they made the nice list this year: hang it on the tree, tie it to the first present of Christmas morning, or cut one for each child in the class with a batch.
How it works
-
Type the name for Santa’s list - Sophia to start with - or switch to “Batch”, one name per line.
-
Pick Layered for a red, white and black Santa glued together, or One piece, engraved on one board.
-
Set the height from 4.33 to 11.81 in; the list and its name scale with him, the loop’s hole does not.
-
Hang him from the loop on his hat or stand him on a base plate, then download the SVG.
What’s in the file
- Layered: Santa, his back plate, the hat with the suit and the trousers, the fur with the beard and the mustache, the mittens with the boots, the nose and the name as separate pieces.
- One piece: Santa with the red parts, the mittens and the boots engraved dark and his lines engraved fine, the name engraved on the light list or cut out of it.
- Gluing guide (optional, layered): the place of every piece drawn on the birch Santa.
- Mount: a ribbon loop on the tip of his hat with the hole size you pick, or a slotted base plate for your sheet thickness.
- SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
- PNG for raster engraving: the engraving alone - the score lines, the engraved areas and the gluing guide black on transparent at 600 dpi, as large as the sheet, so imported true to size it lies exactly on the SVG’s cut lines.
- PDF to print and proof: the same lines as vectors, true to size, every kind of line on a layer of its own - printed at 100 %, it shows the real size.
- AI for Illustrator: the same file as the PDF, which Illustrator opens as its own document, every kind of line on a layer of its own.
- DXF for CAD programs and RDWorks: the lines on the layers CUT, SCORE, ENGRAVE and GUIDE, in mm.
- STL to 3D print the design: the pieces as solids at their thickness - with several parts a ZIP with the whole piece and one STL per part.
- With Batch, several names at once: a ZIP with one file per name, or one sheet with all of them.
Questions
Does Santa stay in one piece?
Yes. Hat, face, beard, suit, list and boots form one closed outline; the lines between them and the curls of the beard are engraved, so no part can fall out. Only the name is cut through the list.
Which name fits on the list?
Up to 12 letters. A short name is written large across the list, a long one smaller, always in its middle between the two rolled ends.
Can I write something other than a name?
Yes: a short word works too, such as Nice, a nickname or a pet’s name, as long as it has no more than 12 letters.
How large is the ornament?
It starts 5.51 in tall and 3.54 in wide. Choose any height from 4.33 to 11.81 in: a classic tree ornament, or a big Santa to stand on the mantel.
Can I make one for every name on a list?
Yes. Choose “Batch” above the first text and paste your list, one piece per line, up to 100. Every line becomes its own piece: download a ZIP with one file each, or one sheet with all of them.
More laser cut files
All laser cut files-
Santa Sleigh Name Ornament
Santa and his reindeer fly over a snowy village under the name on this round bauble.
-
Christmas Gnome Name Ornament
A bearded gnome in a red hat holding a sign with the name.
-
Nutcracker Name Ornament
A nutcracker soldier holding a banner with the name.
-
Santa Letter Envelope Ornament
An open envelope with a pocket for a real letter to Santa.