The 3D view isn’t available right now. Here is the top view.
The app was updated. Reloading the page…
Its files couldn’t be loaded. Reload the page; if that doesn’t help, check your connection.
Your browser can’t start WebGL right now. The 3D view comes back by itself once it can; if it doesn’t, restart the browser (Chrome switches WebGL off after a graphics crash) and check that hardware acceleration is on.
Your browser can’t start WebGL right now. Restarting the browser usually helps (Chrome switches WebGL off after a graphics crash); also check that hardware acceleration is turned on.
It stopped with an error. Try again; if it keeps happening, reload the page.
Details
The cutting plan appears once the preview is ready.
The cutting plan can’t be built right now. The 3D view still shows your design.
Cut Score No score lines Engrave Gluing guide
About this laser cut file
The tall mother bends her neck to nuzzle her little one beside an acacia tree, soft hills and a sun rising at the rim behind them, the name runs across the band at their feet and savanna leaves fill the circle below: a warm keepsake for a new baby, a safari nursery or a baby shower.
How it works
-
Type the baby’s name for the band under the two giraffes.
-
Pick the construction: One piece (Cut out or Engraved) or Layered, with the name glued on a frame across the band.
-
Choose the width under Size, between 90 and 23.62 in. The name’s joints, the hanging hole and the stand’s tabs stay the same size; when you go smaller than drawn, the spots, the acacia’s branches and the grass blades are cut a little bolder so the wood holds together.
-
The name places itself on the band between the rails. Add a hanging hole or a stand under Mount.
-
Look at the giraffe family from every side in the 3D view, check the cutting plan and download the SVG.
What’s in the file
- One sheet with every piece: the sign itself, the name to glue on in the layered build, and the slotted base plate for a standing sign.
- The cut lines, the name as an engraving if you engrave it, plus score lines and a gluing guide whenever you turn them on.
- A full-size SVG that your laser software opens as it is.
- Your settings as a template file, ready to load for the next baby in the family.
- SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
- PNG for raster engraving: the engraving alone - the score lines, the engraved areas and the gluing guide black on transparent at 600 dpi, as large as the sheet, so imported true to size it lies exactly on the SVG’s cut lines.
- PDF to print and proof: the same lines as vectors, true to size, every kind of line on a layer of its own - printed at 100 %, it shows the real size.
- AI for Illustrator: the same file as the PDF, which Illustrator opens as its own document, every kind of line on a layer of its own.
- DXF for CAD programs and RDWorks: the lines on the layers CUT, SCORE, ENGRAVE and GUIDE, in mm.
- STL to 3D print the design: the pieces as solids at their thickness - with several parts a ZIP with the whole piece and one STL per part.
- With Batch, several names at once: a ZIP with one file per name, or one sheet with all of them.
Questions
What happens to letters that reach out of the band?
They keep their full shape. The descender of a g, j, p or y, a swash or a tall capital lies on the artwork, welded to it, while the rails and the ring of the sign stay whole. Switch on Score overlaps to score the letter’s edge where it crosses the artwork.
One piece or Layered: which should I pick?
One piece is cut from a single sheet: Cut out sets the name into the band, its letters joined to the rails, Engraved engraves it on a frame across the band. Layered cuts the name as its own piece and glues it onto a frame across the band, in a second material.
Do the giraffes’ spots stay attached when the sign is cut?
Yes. Every spot is drawn into the outline of its giraffe, both sleepy eyes begin at the edge of the head, and the sun leans on the rim, so the whole scene comes off the laser as one piece. On a sign smaller than drawn, the thinnest spots and blades of grass get slightly bolder.
Is it a good baby shower gift?
It is made for one: put the baby’s name on the band, then hang it over the crib or stand it on a shelf.
Can I make one for every name on a list?
Yes. Choose “Batch” above the first text and paste your list, one piece per line, up to 100. Every line becomes its own piece: download a ZIP with one file each, or one sheet with all of them.
More laser cut files
All laser cut files-
Giraffe Name Sign
A baby giraffe in the leaves, the name on its band.
-
Dino Name Sign
A round dino sign with a name on its band.
-
Tiger Name Sign
A round jungle sign with a tiger and a name on its band.
-
Elephant Balloons Birth Stats Sign
A baby elephant with balloons, the name on a ribbon, the birth stats on flags.