The 3D view isn’t available right now. Here is the top view.
The app was updated. Reloading the page…
Its files couldn’t be loaded. Reload the page; if that doesn’t help, check your connection.
Your browser can’t start WebGL right now. The 3D view comes back by itself once it can; if it doesn’t, restart the browser (Chrome switches WebGL off after a graphics crash) and check that hardware acceleration is on.
Your browser can’t start WebGL right now. Restarting the browser usually helps (Chrome switches WebGL off after a graphics crash); also check that hardware acceleration is turned on.
It stopped with an error. Try again; if it keeps happening, reload the page.
Details
The cutting plan appears once the preview is ready.
The cutting plan can’t be built right now. The 3D view still shows your design.
Cut Score No score lines Engrave Gluing guide
About this laser cut file
The rose lies on its side with the head on the right, and the name is joined to the stem, so it becomes part of the rose.
Build it layered, with an openwork front glued onto a solid back plate that you can paint, or as one piece with the petals and leaf veins cut out or engraved. Hang it from a loop at the head, at the end of the stem or both, or stand it in a flat base.
How it works
-
Type the name. It is set in script along the stem.
-
Choose Layered or One piece. Layered raises the name on the stem over a frame on the back plate; in One piece the name is cut through its frame or engraved.
-
The name fits itself along the stem.
-
Set the length under Size, from 3.54 to 39.37 in. The loop holes, the stand’s tabs and slots, the bridges and the name’s joints keep their size.
-
Under Mount, pick the loops or the stand, then download the SVG and open it in your laser program.
What’s in the file
- Cut lines for every piece on one sheet: the back plate and the front plate one below the other, or the rose as one piece.
- One piece: the petals and the leaf veins are made as the name is, cut through or engraved. Cut out holds the insides of letters such as a, e and o with small bridges; Engraved has the name filled or as outlines.
- Gluing guide (optional, Layered): a fine line on the back plate where the name goes.
- Loops on the head, on the end of the stem or both, the same on both plates. On the stand: the rose cut straight under the head and the lower leaf, tabs at their true size and a base plate with slots cut to your sheet thickness.
- SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
- PNG for raster engraving: the engraving alone - the score lines, the engraved areas and the gluing guide black on transparent at 600 dpi, as large as the sheet, so imported true to size it lies exactly on the SVG’s cut lines.
- PDF to print and proof: the same lines as vectors, true to size, every kind of line on a layer of its own - printed at 100 %, it shows the real size.
- AI for Illustrator: the same file as the PDF, which Illustrator opens as its own document, every kind of line on a layer of its own.
- DXF for CAD programs and RDWorks: the lines on the layers CUT, SCORE, ENGRAVE and GUIDE, in mm.
- STL to 3D print the design: the pieces as solids at their thickness - with several parts a ZIP with the whole piece and one STL per part.
- With Batch, several names at once: a ZIP with one file per name, or one sheet with all of them.
Questions
What sets the layered rose apart from the one-piece rose?
Layered makes two plates: the front with the openwork rose and the name raised on the stem, and a solid back plate behind it that shows through the openings, so it can have other colors. One piece is cut from a single sheet: the name is cut through a frame on the stem or engraved, and the details of the rose are cut through or engraved with it.
What does the frame width do?
The frame is a plaque around the name: the name grown by the width you set, with its gaps filled. In the layered rose it sits on the back plate and frames the raised letters in the back plate’s color; set it to 0 for a name on the stem alone. In one piece it holds the cut or engraved name in the rose.
Where does the name go?
Along the stem, as large as the stem allows. It always stays part of the rose: welded onto the stem or held by its frame.
How do I hang it or stand it?
Under Mount, choose Hole: Top puts a loop on the tip of the rose head, so the rose hangs head up; Bottom puts it on the end of the stem; Both adds the two. Or choose Stand: the rose stands as it lies, on two tabs under the head and the lower leaf in a flat base plate. Set the thickness to your sheet, and the slots are cut to fit it.
Can the name have umlauts or accents?
Yes. Ä, Ö and Ü keep their dots. On the raised name the dots are joined to their letters, so nothing falls off. Letters a font does not have are spelled plainly with a note.
Can I make one for every name on a list?
Yes. Choose “Batch” above the first text and paste your list, one piece per line, up to 100. Every line becomes its own piece: download a ZIP with one file each, or one sheet with all of them.