The 3D view isn’t available right now. Here is the top view.
The app was updated. Reloading the page…
Its files couldn’t be loaded. Reload the page; if that doesn’t help, check your connection.
Your browser can’t start WebGL right now. The 3D view comes back by itself once it can; if it doesn’t, restart the browser (Chrome switches WebGL off after a graphics crash) and check that hardware acceleration is on.
Your browser can’t start WebGL right now. Restarting the browser usually helps (Chrome switches WebGL off after a graphics crash); also check that hardware acceleration is turned on.
It stopped with an error. Try again; if it keeps happening, reload the page.
Details
The cutting plan appears once the preview is ready.
The cutting plan can’t be built right now. The 3D view still shows your design.
Cut Score No score lines Engrave Gluing guide
About this laser cut file
The base lights the plate from below, and everything engraved shines.
Each name follows the curve of its ring’s band, and the plate’s outline follows the rings and your texts by itself. The tab at the bottom is made to the size of your base’s slot. See it lit in the 3D view, in the color of your base.
How it works
-
Type the two names and the date, for example “Hanna”, “Felix” and “09/12/2025”.
-
Set the size of the rings, the edge round them and the tab for your base: its width, its height, its distance from the date and, if needed, its offset.
-
Choose the fonts, outlined or filled texts, and the light color of the preview.
-
Download the SVG, engrave the rings and the texts, cut the outline and stand the plate in its base.
What’s in the file
- Cut lines: the outline of the plate, narrowing to the tab at the bottom.
- Engraving: the two rings as filled areas and, with “Filled”, the names and the date too.
- Score lines: with “Outline”, the outlines of the names and the date, their letters left clear; very small text is always filled.
- SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
- PNG for raster engraving: the engraving alone - the score lines, the engraved areas and the gluing guide black on transparent at 600 dpi, as large as the sheet, so imported true to size it lies exactly on the SVG’s cut lines.
- PDF to print and proof: the same lines as vectors, true to size, every kind of line on a layer of its own - printed at 100 %, it shows the real size.
- AI for Illustrator: the same file as the PDF, which Illustrator opens as its own document, every kind of line on a layer of its own.
- DXF for CAD programs and RDWorks: the lines on the layers CUT, SCORE, ENGRAVE and GUIDE, in mm.
- STL to 3D print the design: the pieces as solids at their thickness - with several parts a ZIP with the whole piece and one STL per part.
- With Batch, several lamps at once: a ZIP with one file per lamp, or one sheet with all of them.
Questions
Which base does it fit?
The usual round LED bases. The tab is 2.78 in wide and 0.55 in tall to begin with, which suits a base of about 3.54 to 3.94 in across; under “Base tab” you set it to your base’s slot, and it keeps that size at any lamp size.
Why does the plate narrow toward the tab?
Below the date the plate runs on and its sides slope in to the tab. The light from the base then spreads into the whole plate and everything engraved glows more evenly. “Tab distance” under “Base tab” sets how far the tab is from the date.
How do the names sit on the rings?
Each name is engraved on the front band of its ring and follows the band’s curve, letter by letter. It is made as large as the band allows; a long name gets smaller until it fits.
Does the outline fit a long date?
Yes. The plate reaches the same distance past everything engraved: the rings, the names and the date. A long date makes the plate grow round it, a short one lets it shrink, always as one piece. “Border” sets that distance.
Can I see how it looks lit?
Yes. Switch the light color in the 3D view: blue, warm white, pink, green, purple or a slow cycle, with the plate standing in a round LED base. The file is the same whichever color you pick.
Can I make one for every name on a list?
Yes. Choose “Batch” above the first text and paste your list, one piece per line, up to 100. Every line becomes its own piece: download a ZIP with one file each, or one sheet with all of them.