Menu

3D preview: a reindeer ornament with a big initial R and the name Rosie

Your file SVG · For every laser

Choose your format

Your settings

Name and letter
Rosie · R
Construction
Layered · Embossed
Size
145 x 162 mm
Mount
Hanging hole, center, 5 mm
Cutting plan
–

Free for personal use For your own projects and gifts, not for sale. Selling needs the commercial license. Sell commercially now

About this laser cut file

Next to it stands a big initial on the snowy ground, with the full name in the snow below - a personal ornament for a child’s first tree, a stocking filler or a whole family, one letter each.

How it works

  1. Type the name: its first letter becomes the big initial. Type another letter in the Letter field to use that one instead.

  2. Choose Layered, with the ornament glued onto a red back plate that shows through every opening and the letter and the name glued on in white, or One piece, with them cut out or engraved.

  3. Set the width, 3.94 to 11.81 in: the reindeer, the letter and the name grow with it, the hanging hole and the stand’s tabs do not.

  4. Hang it from the hole above the cap, put it on a stand, or leave both off - then download the SVG.

What’s in the file

  • Layered: the ornament with the reindeer, the snowflake and a frame round the letter and the name, the back plate to glue it on, and the letter and the name as a piece of their own.
  • One piece: the ornament with the letter and the name joined to the ground and the ring, or engraved on a frame, filled or as outlines.
  • Gluing guide (optional, layered): where the ornament goes on the back plate and the letter and the name on their frames.
  • Mount: a hole above the cap, or a base plate with slots for your sheet thickness.
  • SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
  • With Batch, several names at once: a ZIP with one file per name, or one sheet with all of them.

Questions

Which letter is used?

The first letter of the name, so Rosie gets an R. To use another one - a family name’s initial, say - type it into the Letter field.

What happens with a long name?

It is set smaller so it still fits the snow under the ground, up to 24 characters; the letter keeps its size.

Which colors fit?

As in the 3D view: birch for the ornament, white for the letter and the name, and red for the back plate, which shows in the window, the scarf and the snow. Green or yellow behind birch works just as well.

Can I make one for every name on a list?

Yes. Choose “Batch” above the first text and paste your list, one piece per line, up to 100. Every line becomes its own piece: download a ZIP with one file each, or one sheet with all of them.

Your file is ready

Sign up in 5 seconds and download it, with 5 laser cut files every day after.

At least 6 characters. You sign in with your e-mail address and this password.

Already have an account?

By creating an account you agree to our Terms and our Privacy policy.