Menu

3D preview: a glowing lamp with two hearts, the names Elin and Jonas and a date, on a round LED base

Your file SVG · For every laser

Choose your format

Your settings

Names and date
Elin & Jonas
Construction
Outlined text
Size
181 mm wide
Light
Blue
Base tab
70.7 x 14 mm
Cutting plan
–

Free for personal use For your own projects and gifts, not for sale. Selling needs the commercial license. Sell commercially now

About this laser cut file

The base lights the plate from below, and everything engraved shines.

The plate’s outline follows the hearts and your texts by itself, and the tab at the bottom is made to the size of your base’s slot. See it lit in the 3D view, in the color of your base.

How it works

  1. Type the two names and the date, for example “Elin”, “Jonas” and “06/14/2024”.

  2. Choose how the texts are engraved: as glowing outlines, like the drawing’s names, or filled.

  3. Set the size of the hearts and, under “Base tab”, the tab for your base: its width, its height and, if needed, its offset.

  4. Pick the fonts and the preview’s light color.

  5. Download the SVG, engrave the lines and the texts, cut the outline and stand the plate in its base.

What’s in the file

  • Cut lines: the outline round both hearts and the names, with the tab that goes into the base.
  • Score lines: the two wire-grid hearts, which run right up to every letter, and the outlines of the names and the date.
  • Engraving: with “Filled”, the names and the date as filled areas; very small text is always filled.
  • SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
  • With Batch, several lamps at once: a ZIP with one file per lamp, or one sheet with all of them.

Questions

Which base does it fit?

The standard round LED bases. Out of the box the tab measures 2.78 by 0.55 in, which fits a typical base around 3.54 to 3.94 in wide. “Base tab” lets you enter your slot’s width and height, and the tab holds that size however large the lamp gets.

How does the outline work?

The plate reaches the same distance past everything engraved: the hearts, the names and the date. A longer name or a moved date makes the plate grow with it, always as one piece. “Border” sets that distance.

Can I see how it looks lit?

Yes. The preview shows the lamp lit in its round LED base - blue, warm white, pink, green, purple, or slowly cycling. The light color is for the 3D view only, not for the file.

How big can the lamp be?

By default the hearts are 7.09 in wide and the plate about 7.48 by 5.12 in. Under “Size” you can set the hearts from 2.36 to 23.62 in wide. The tab and the edge keep their real size; small names get a note.

Can I make one for every name on a list?

Yes. Choose “Batch” above the first text and paste your list, one piece per line, up to 100. Every line becomes its own piece: download a ZIP with one file each, or one sheet with all of them.

Your file is ready

Sign up in 5 seconds and download it, with 5 laser cut files every day after.

At least 6 characters. You sign in with your e-mail address and this password.

Already have an account?

By creating an account you agree to our Terms and our Privacy policy.