The 3D view isn’t available right now. Here is the top view.
The app was updated. Reloading the page…
Its files couldn’t be loaded. Reload the page; if that doesn’t help, check your connection.
Your browser can’t start WebGL right now. The 3D view comes back by itself once it can; if it doesn’t, restart the browser (Chrome switches WebGL off after a graphics crash) and check that hardware acceleration is on.
Your browser can’t start WebGL right now. Restarting the browser usually helps (Chrome switches WebGL off after a graphics crash); also check that hardware acceleration is turned on.
It stopped with an error. Try again; if it keeps happening, reload the page.
Details
The cutting plan appears once the preview is ready.
The cutting plan can’t be built right now. The 3D view still shows your design.
Cut Score No score lines Engrave Gluing guide
About this laser cut file
A tall ear with its lynx tuft rises above the broad head, the slit-pupil eye looks out between bold tabby lines, and a shaggy ruff falls like a lion’s mane down beside the bar, while the name runs in big capitals down it.
A fine piece for a cat tree corner, the feeding spot or the door of a proud cat family.
How it works
-
Type your cat’s name, and the bar sets it in capitals from its top edge down to its foot.
-
Choose Layered for letters glued onto the bar as raised pieces, or One piece for a name cut through the bar or engraved on it.
-
Set a height between 90 and 35.43 in under Size, and the width comes along. Below the drawn size the ruff’s locks and the tabby lines are cut slightly bolder, while the hole, the stand’s tabs and the bridges keep their size.
-
Mirror places the bar on the right, with the Maine Coon peering in from the left.
-
Under Mount pick a hole or a stand, preview it in 3D and download the SVG.
What’s in the file
- The bar and the Maine Coon’s head and ruff in one cut piece, with the letters apart for gluing.
- For One piece: the name cut out of the bar, its letters’ insides held by small bridges, or the name engraved filled or in outline.
- When switched on, an engraved guide showing where every letter is glued.
- With the stand: a foot with tabs and a base plate slotted for the sheet you cut from.
- SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
- PNG for raster engraving: the engraving alone - the score lines, the engraved areas and the gluing guide black on transparent at 600 dpi, as large as the sheet, so imported true to size it lies exactly on the SVG’s cut lines.
- PDF to print and proof: the same lines as vectors, true to size, every kind of line on a layer of its own - printed at 100 %, it shows the real size.
- AI for Illustrator: the same file as the PDF, which Illustrator opens as its own document, every kind of line on a layer of its own.
- DXF for CAD programs and RDWorks: the lines on the layers CUT, SCORE, ENGRAVE and GUIDE, in mm.
- STL to 3D print the design: the pieces as solids at their thickness - with several parts a ZIP with the whole piece and one STL per part.
- With Batch, several names at once: a ZIP with one file per name, or one sheet with all of them.
Questions
Does the shaggy ruff stay in one piece?
Yes. Each lock of the ruff starts at the outline or the bar, the ear’s fur lines grow out of the ear’s edge, and the eye joins the fur line beside it, so the cat comes off the laser in one piece.
Are there whiskers?
No. Whiskers would be far too thin to cut, so the face is drawn with bold fur and tabby lines instead.
What is the smallest size?
3.54 in high. The fur lines are slim, and below that they would be too fine for the laser.
What about a long cat name?
It fits. The capitals get smaller as the name gets longer and always fill the bar from top to bottom, and short names get tall letters with room between them.
Can I set it on a shelf?
Yes. Choose Stand under Mount for a flat foot with tabs that slide into a base plate made for your sheet, or Hole to hang it up.
Can I make one for every name on a list?
Yes. Choose “Batch” above the first text and paste your list, one piece per line, up to 100. Every line becomes its own piece: download a ZIP with one file each, or one sheet with all of them.
More laser cut files
All laser cut files-
Beagle Name Sign
A sweet beagle with a long velvety ear looks out from beside its name.
-
Peeking Cat Name Sign
A cat peeking over a name.
-
Tiger Name Sign
A round jungle sign with a tiger and a name on its band.
-
Golden Retriever Name Sign
Half a smiling golden retriever with wavy fur, the dog’s name stacked down the bar beside it.