The 3D view isn’t available right now. Here is the top view.
The app was updated. Reloading the page…
Its files couldn’t be loaded. Reload the page; if that doesn’t help, check your connection.
Your browser can’t start WebGL right now. The 3D view comes back by itself once it can; if it doesn’t, restart the browser (Chrome switches WebGL off after a graphics crash) and check that hardware acceleration is on.
Your browser can’t start WebGL right now. Restarting the browser usually helps (Chrome switches WebGL off after a graphics crash); also check that hardware acceleration is turned on.
It stopped with an error. Try again; if it keeps happening, reload the page.
Details
The cutting plan appears once the preview is ready.
The cutting plan can’t be built right now. The 3D view still shows your design.
Cut Score No score lines Engrave Gluing guide
About this laser cut file
A crooked house with glowing windows sits on its hill under a crescent moon, bats flit between the branches of a twisted tree, and three jack-o’-lanterns grin from the grass; the name runs across the band, and a vine of little pumpkins fills the strip below: a spooky-friendly piece for the front door, a kid’s room or the Halloween party table.
How it works
-
Enter the name that should sit under the haunted house.
-
Pick the construction: One piece (Cut out or Engraved) or Layered, with the name glued on a frame across the band.
-
Set the width under Size, from 3.54 to 23.62 in; the height follows the rectangle. The name’s joints, the hanging hole and the stand’s tabs keep their size, and on a sign smaller than drawn the bat wings, the branches and the pumpkin faces are cut a little bolder.
-
The name sets itself on the band between its rails. Under Mount, pick a hanging hole or a stand.
-
Check the sign in the 3D view, glance over the cutting plan and download the SVG.
What’s in the file
- A single sheet with all parts: the rectangular sign, the name to glue on for the layered build, and the slotted base plate when it stands.
- Cut lines, the engraved name if you choose engraving, and score lines and a gluing guide when you turn them on.
- One true-size SVG that every laser program can open.
- A template file with your settings, handy for a sign for every child in the house.
- SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
- PNG for raster engraving: the engraving alone - the score lines, the engraved areas and the gluing guide black on transparent at 600 dpi, as large as the sheet, so imported true to size it lies exactly on the SVG’s cut lines.
- PDF to print and proof: the same lines as vectors, true to size, every kind of line on a layer of its own - printed at 100 %, it shows the real size.
- AI for Illustrator: the same file as the PDF, which Illustrator opens as its own document, every kind of line on a layer of its own.
- DXF for CAD programs and RDWorks: the lines on the layers CUT, SCORE, ENGRAVE and GUIDE, in mm.
- STL to 3D print the design: the pieces as solids at their thickness - with several parts a ZIP with the whole piece and one STL per part.
- With Batch, several names at once: a ZIP with one file per name, or one sheet with all of them.
Questions
What happens to letters that reach out of the band?
They keep their full shape. The descender of a g, j, p or y, a swash or a tall capital lies on the artwork, welded to it, while the rails and the ring of the sign stay whole. Switch on Score overlaps to score the letter’s edge where it crosses the artwork.
One piece or Layered: which should I pick?
One piece is cut from a single sheet: Cut out sets the name into the band, its letters joined to the rails, Engraved engraves it on a frame across the band. Layered cuts the name as its own piece and glues it onto a frame across the band, in a second material.
Do the bats and pumpkin faces stay in place when it is cut?
Yes. Each bat touches the moon, a branch or the frame, and the carved faces and the windows are openings in solid shapes, so the whole scene is one piece of wood. Smaller than drawn, the thinnest wings and twigs are cut a little bolder.
Can I hang it on the front door for Halloween?
Yes. Choose a hanging hole and tie a ribbon through it, or stand it on the porch steps or a shelf with the stand. With a family name on the band it greets every trick-or-treater.
Can I make one for every name on a list?
Yes. Choose “Batch” above the first text and paste your list, one piece per line, up to 100. Every line becomes its own piece: download a ZIP with one file each, or one sheet with all of them.