Menu

3D preview: a layered gift card holder with the name Maya and gift boxes

Your file SVG · For every laser

Choose your format

Your settings

Name
Maya
Construction
Layered · Embossed
Size
93 x 61 mm
Mount
Off
Cutting plan
–

Free for personal use For your own projects and gifts, not for sale. Selling needs the commercial license. Sell commercially now

About this laser cut file

Three plates of the same rounded outline are glued on top of each other: a back plate, a spacer with a pocket open on one side where the card slides in, and a top plate with a window framed by four gift boxes with ribbons and bows.

The name sits across the window and reaches the frame like a bridge, so the top plate stays one piece. Glue the name on its border as its own piece, cut the name itself from the top plate, its letters joined to the frame, or engrave it into its border. The pocket fits a standard gift card the size of a bank card.

How it works

  1. Type the name; it is set across the window.

  2. Choose Layered to glue the name on, or One piece to cut the name itself from the top plate or engrave it into its border, filled or as outlines.

  3. The name fits itself across the holder, tilted a little, and the gift boxes make room around it.

  4. Under Mount, choose Hole, Stand or None; set the holder’s width under Size if you want it larger.

  5. Download the SVG and load it into your laser program.

What’s in the file

  • Cut lines: the back plate, the spacer with the card pocket and the top plate with the gifts and the name or its border, each as one piece.
  • The name as its own piece when it is layered.
  • Cut lines for a cut-out name: the name itself as part of the top plate, its letters joined to each other and to the frame.
  • Engraving of an engraved name, filled or as outlines.
  • Gluing guide (optional): shows where the layered name goes on its border.
  • On the stand: two tabs under the back plate and a base plate with the matching slots.
  • At the width you set: only the frame grows, the pocket still fits the card, and the loop hole, the tabs and the slots keep their true size.
  • SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
  • With Batch, several names at once: a ZIP with one file per name, or one sheet with all of them.

Questions

Which cards fit into the holder?

The pocket is made for the standard card size of 3.37 by 2.13 in, the size of gift cards and bank cards. It is cut 0.039 in taller than the card, so the card slides in and out easily from the open side.

Layered or one piece?

Layered cuts the name as its own piece that you glue onto its border, so it stands out in a second color. One piece cuts the name itself from the top plate, its letters joined to the frame, so the gift card shows round them; or it engraves the name into its border, filled or as outlines. Either way the holder is the same three plates.

How are the plates put together?

Glue the spacer onto the back plate with its open side facing out, then the top plate on top so the outlines line up. A layered name goes onto its border on the top plate. Keep glue away from the pocket.

Hole, stand or none?

Hole adds a round tab with a ribbon hole on the top edge, through all three plates; you can move it and set the size of the hole. Stand adds two tabs under the back plate that fit the slots of a flat base plate, cut to your sheet thickness, so the holder stands on a table. None gives the plain holder, to hand over in an envelope.

Where does the name go?

Across the holder, tilted a little. It always reaches the frame on both sides (a short name cut out: above and below), and the gift boxes make room around it: they get smaller, and where there is no room left, a gift steps aside.

Can I make one for every name on a list?

Yes. Choose “Batch” above the first text and paste your list, one piece per line, up to 100. Every line becomes its own piece: download a ZIP with one file each, or one sheet with all of them.

Your file is ready

Sign up in 5 seconds and download it, with 5 laser cut files every day after.

At least 6 characters. You sign in with your e-mail address and this password.

Already have an account?

By creating an account you agree to our Terms and our Privacy policy.