The 3D view isn’t available right now. Here is the top view.
The app was updated. Reloading the page…
Its files couldn’t be loaded. Reload the page; if that doesn’t help, check your connection.
Your browser can’t start WebGL right now. The 3D view comes back by itself once it can; if it doesn’t, restart the browser (Chrome switches WebGL off after a graphics crash) and check that hardware acceleration is on.
Your browser can’t start WebGL right now. Restarting the browser usually helps (Chrome switches WebGL off after a graphics crash); also check that hardware acceleration is turned on.
It stopped with an error. Try again; if it keeps happening, reload the page.
Details
The cutting plan appears once the preview is ready.
The cutting plan can’t be built right now. The 3D view still shows your design.
Cut Score No score lines Engrave Gluing guide
About this laser cut file
White laces run along the top of the ball and a white stripe wraps round each end, glued on over the brown leather, while the name sits on the smooth panel below the laces.
Make one for every player on the team as an end-of-season present, hang it on the Christmas tree for the family’s quarterback, or tie it to the coach’s gift bag.
The One piece version engraves the leather dark and leaves the laces, the stripes and the name in bare wood, so a single board still reads like a real game ball.
How it works
-
Type the player’s name - Wyatt is filled in - or paste the whole roster under Batch.
-
Choose Layered, a brown ball with white laces and stripes on a green back, or One piece with the leather engraved.
-
Set the ball’s width from 3.15 to 9.84 in; 3.94 in hangs well on a tree branch.
-
Keep the loop for a ribbon or choose a stand for a shelf, then download the file.
What’s in the file
- Layered: the ball with its seams engraved, the laces and both stripes as pieces of their own, the green back plate and the name.
- One piece: the ball with its leather engraved, the laces, the stripes and the name left in bare wood.
- Gluing guide (optional, layered): where the laces, the stripes and the name go.
- SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
- PNG for raster engraving: the engraving alone - the score lines, the engraved areas and the gluing guide black on transparent at 600 dpi, as large as the sheet, so imported true to size it lies exactly on the SVG’s cut lines.
- PDF to print and proof: the same lines as vectors, true to size, every kind of line on a layer of its own - printed at 100 %, it shows the real size.
- AI for Illustrator: the same file as the PDF, which Illustrator opens as its own document, every kind of line on a layer of its own.
- DXF for CAD programs and RDWorks: the lines on the layers CUT, SCORE, ENGRAVE and GUIDE, in mm.
- STL to 3D print the design: the pieces as solids at their thickness - with several parts a ZIP with the whole piece and one STL per part.
- With Batch, several names at once: a ZIP with one file per name, or one sheet with all of them.
Questions
Do the laces stay in one piece?
Yes. The laces are one ladder-shaped piece whose stitches are over 0.079 in wide at 3.94 in, cut whole and glued on in white; the ball under them is one solid piece.
How long can the name be?
Up to 12 letters fit on the panel between the stripes; a short name is set larger.
Which size makes a good team gift?
At 3.94 in it hangs on a tree or a gift bag; from 5.91 in it stands on a shelf with the stand, a keepsake of the season.
Can I make one for every name on a list?
Yes. Choose “Batch” above the first text and paste your list, one piece per line, up to 100. Every line becomes its own piece: download a ZIP with one file each, or one sheet with all of them.