Menu

3D preview: half a Chihuahua’s face with a tall ear beside a bar with the name CHLOE

Your file SVG · For every laser

Choose your format

Your settings

Name
Chloe
Construction
Layered · Embossed
Size
193 x 300 mm
Mount
Off
Cutting plan
–

Free for personal use For your own projects and gifts, not for sale. Selling needs the commercial license. Sell commercially now

About this laser cut file

The little dog peeks out from behind the bar: one huge pointed ear, one big round eye and half of its tiny nose, while its name runs down the bar in bold capitals.

Made for the corner with the dog bed, the crate, or a Chihuahua lover’s shelf.

How it works

  1. Enter the dog’s name; it is set in capitals, each letter under the one before.

  2. Glue the letters onto the bar with Layered, or let One piece cut the name through the bar or engrave it.

  3. Set the height under Size, between 75 and 35.43 in; the width comes with it. Below the drawn size, the fine lines of the ear and the eye are cut a little bolder, while the hole, the stand’s tabs and the bridges in the letters keep their size.

  4. Mirror moves the bar to the right side and the face to the left.

  5. Pick a hole or a stand under Mount, turn the sign in the 3D view and save the SVG.

What’s in the file

  • One piece for the sign: the bar and the half head together, with the raised letters beside it when you build it layered.
  • One piece: the name cut through the bar, its letters’ insides held by small bridges, or the name engraved filled or as outlines.
  • A gluing guide on request, so every letter lands in its place.
  • For standing: the foot cut straight, its tabs, and a base plate slotted to the thickness of your sheet.
  • SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
  • With Batch, several names at once: a ZIP with one file per name, or one sheet with all of them.

Questions

Will the big eye and the tall ear hold together?

Yes. The eye hangs on the fold at its inner corner, which runs into the bar, and every line of the ear and the cheek grows out of the head’s outline, so the Chihuahua leaves the laser as one solid piece. Smaller than drawn, its finest lines are cut bolder.

Why is the smallest size 2.95 in?

The ear and the eye are drawn with slimmer lines than the other signs of this kind. From 2.95 in up they stay strong enough to cut and to handle.

Does a long name fit as well as a short one?

Yes. A short name like Coco gets large letters spread over the bar; a long one gets smaller letters closer together, so the name always fills the bar from top to bottom.

In which order do I glue the layered letters?

Start with the top letter and work down the bar. Turn on the gluing guide and the file marks where each one goes.

Can the sign stand on a shelf?

Yes. Choose Stand under Mount: a straight foot with tabs slots into a flat base plate, cut for the thickness you set. Choose Hole for a nail or a ribbon instead.

Can I make one for every name on a list?

Yes. Choose “Batch” above the first text and paste your list, one piece per line, up to 100. Every line becomes its own piece: download a ZIP with one file each, or one sheet with all of them.

Your file is ready

Sign up in 5 seconds and download it, with 5 laser cut files every day after.

At least 6 characters. You sign in with your e-mail address and this password.

Already have an account?

By creating an account you agree to our Terms and our Privacy policy.