The 3D view isn’t available right now. Here is the top view.
The app was updated. Reloading the page…
Its files couldn’t be loaded. Reload the page; if that doesn’t help, check your connection.
Your browser can’t start WebGL right now. The 3D view comes back by itself once it can; if it doesn’t, restart the browser (Chrome switches WebGL off after a graphics crash) and check that hardware acceleration is on.
Your browser can’t start WebGL right now. Restarting the browser usually helps (Chrome switches WebGL off after a graphics crash); also check that hardware acceleration is turned on.
It stopped with an error. Try again; if it keeps happening, reload the page.
Details
The cutting plan appears once the preview is ready.
The cutting plan can’t be built right now. The 3D view still shows your design.
Cut Score No score lines Engrave Gluing guide
About this laser cut file
An A-frame tent with its flaps tied back stands beside a fire of crossed logs, snowy peaks rise behind them between tall pines, and a crescent moon hangs in the night sky with its stars.
Beneath the band two canoe paddles cross behind an old camping lantern, framed by pine sprigs and cones.
Hang it on the camper, prop it at the campsite on a family trip, or give it to the outdoorsy dad on Father’s Day with the family’s name on the band.
How it works
-
Type the family name for the band - The Carsons as the example - or several families for a whole camping club.
-
Pick the construction: One piece (Cut out or Engraved) or Layered, with the name glued on a frame across the band.
-
Set the width under Size from 3.54 to 23.62 in. The name’s joints, the hanging hole and the stand’s tabs keep their size; small, the pine needles and the stars come out a bit bolder.
-
The name fits itself onto the band; Mount gives you a hole to hang it or a stand.
-
Walk round the campsite in the 3D view, then save the SVG.
What’s in the file
- The round campsite sign, the glued-on name of the layered build and the slotted stand, nested on one sheet.
- Cut lines, the name’s engraving when you engrave it, and score lines and a gluing guide when they are switched on.
- One full-size SVG for your laser program.
- Your settings kept as a template for the next family.
- SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
- PNG for raster engraving: the engraving alone - the score lines, the engraved areas and the gluing guide black on transparent at 600 dpi, as large as the sheet, so imported true to size it lies exactly on the SVG’s cut lines.
- PDF to print and proof: the same lines as vectors, true to size, every kind of line on a layer of its own - printed at 100 %, it shows the real size.
- AI for Illustrator: the same file as the PDF, which Illustrator opens as its own document, every kind of line on a layer of its own.
- DXF for CAD programs and RDWorks: the lines on the layers CUT, SCORE, ENGRAVE and GUIDE, in mm.
- STL to 3D print the design: the pieces as solids at their thickness - with several parts a ZIP with the whole piece and one STL per part.
- With Batch, several names at once: a ZIP with one file per name, or one sheet with all of them.
Questions
What happens to letters that reach out of the band?
They keep their full shape. The descender of a g, j, p or y, a swash or a tall capital lies on the artwork, welded to it, while the rails and the ring of the sign stay whole. Switch on Score overlaps to score the letter’s edge where it crosses the artwork.
One piece or Layered: which should I pick?
One piece is cut from a single sheet: Cut out sets the name into the band, its letters joined to the rails, Engraved engraves it on a frame across the band. Layered cuts the name as its own piece and glues it onto a frame across the band, in a second material.
Do the stars and the moon hold?
Yes. The moon hangs from the ring, two stars sit right on the ring and one on the moon, with no bar, and the tent, the fire and the trees all stand on the band’s rail, so the whole scene cuts as one piece.
Can I make one for every name on a list?
Yes. Choose “Batch” above the first text and paste your list, one piece per line, up to 100. Every line becomes its own piece: download a ZIP with one file each, or one sheet with all of them.
More laser cut files
All laser cut files-
Fishing Name Sign
A round angler’s sign with a leaping bass, a rod and cattails.
-
Guitar Name Sign
Two crossed guitars and music notes over the name.
-
Housewarming Family Name Sign
A cozy house with a heart-puffing chimney over the family’s name.
-
Excavator Name Sign
A round construction sign with a digging excavator over the name.