Menu

3D preview: a round dog ornament with the name Bella in a bone-shaped window at the bottom

Your file SVG · For every laser

Choose your format

Your settings

Name
Bella
Construction
Layered · Embossed
Size
110 x 110 mm
Mount
Hanging hole, center, 9.4 mm
Cutting plan
–

Free for personal use For your own projects and gifts, not for sale. Selling needs the commercial license. Sell commercially now

About this laser cut file

The window sits low inside the round ring, and through it the name shows on the back plate.

Above it, the rest of the back plate is free for an engraved photo of the dog.

Layered, the name is glued onto the back plate inside the bone, so the frame outlines it in a darker tone. In one piece the frame is cut alone: a cut-out name joins the bone’s frame where it meets it, an engraved one sits on a slim frame across the window.

How it works

  1. Type the dog’s name and pick a font.

  2. Pick the construction: Layered, with the name glued on, or One piece, with the name cut out or engraved.

  3. Set the width under Size, from 1.57 to 12.99 in. The loop hole and the stand’s tabs and slots keep their size.

  4. The name fits itself into its place. Layered, the open area of the back plate is where the photo goes.

  5. Download the SVG, place your dog’s photo on the back plate in your laser software, and cut the plates.

What’s in the file

  • Layered: cut lines for the back plate and the front frame, side by side on one sheet, plus the name to glue on.
  • One piece: the frame with the name cut out, its insides on small bridges, or engraved, filled or as outlines.
  • On the stand: the plates cut straight at the bottom, tabs into a base plate with matching slots.
  • At the size you set: the loop hole, the tabs and the slots at their true size, and a cut-out name too small to cut is engraved for you.
  • The photo is not part of the file: you place it on the back plate in your laser software.
  • Batch: a ZIP with one file per name, or one sheet with both plates of every name.
  • SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
  • With Batch, several names at once: a ZIP with one file per name, or one sheet with all of them.

Questions

Does the name in the window show in a second tone?

Layered, yes: it is glued onto the back plate inside the bone window, and the frame around it is the other tone. Choose One piece for a single-sheet ornament, with the name joined to the bone’s frame or engraved.

Where does the dog’s photo go?

Layered, on the back plate, in the area the front frame leaves open. The photo is not part of the file: place your picture there in your laser software and engrave it before you glue the frame on.

Layered or one piece?

Layered cuts the back plate, the frame and the name: the frame is glued onto the back plate and the name on top, so it stands out in a second tone. One piece cuts the frame alone, with the name cut out, the insides of letters such as a, e and o held by small bridges, or engraved, filled or as outlines.

How are the two plates assembled?

Cut both plates, engrave the photo on the back plate, then glue the front frame on top so that the two outlines line up. Under Mount, choose Hole to hang it on a ribbon, Stand to set it in a flat base plate (its tabs fit slots cut to your sheet thickness), or None.

Can I make one for every name on a list?

Yes. Choose “Batch” above the first text and paste your list, one piece per line, up to 100. Every line becomes its own piece: download a ZIP with one file each, or one sheet with all of them.

Your file is ready

Sign up in 5 seconds and download it, with 5 laser cut files every day after.

At least 6 characters. You sign in with your e-mail address and this password.

Already have an account?

By creating an account you agree to our Terms and our Privacy policy.