The 3D view isn’t available right now. Here is the top view.
The app was updated. Reloading the page…
Its files couldn’t be loaded. Reload the page; if that doesn’t help, check your connection.
Your browser can’t start WebGL right now. The 3D view comes back by itself once it can; if it doesn’t, restart the browser (Chrome switches WebGL off after a graphics crash) and check that hardware acceleration is on.
Your browser can’t start WebGL right now. Restarting the browser usually helps (Chrome switches WebGL off after a graphics crash); also check that hardware acceleration is turned on.
It stopped with an error. Try again; if it keeps happening, reload the page.
Details
The cutting plan appears once the preview is ready.
The cutting plan can’t be built right now. The 3D view still shows your design.
Cut Score No score lines Engrave Gluing guide
About this laser cut file
Its fluffy ears droop, its big nose rests against a eucalyptus branch it hugs with both arms, and long leaves grow up on either side; the baby’s name sits in the open sky above in a soft rounded script.
Layered, the gray koala, its white tummy, pink inner ears and dark nose are inlaid with the moss green eucalyptus on a sage plate, every line of the drawing showing the plate between the pieces. Engraved on one plate, it turns into a calm wooden picture.
Hang it over the crib, give it at a baby shower with a koala theme, or make one for a first birthday down under.
How it works
-
Type the baby’s name - Isla to begin with - and set how close its letters sit.
-
Choose Layered, the koala and the eucalyptus inlaid on a sage plate, or One piece: everything engraved, or the sky cut away so the name hangs free.
-
Set the width between 10 and 11.81 in and the border the plate shows round the ring.
-
Cut the pieces, glue each into its place on the plate with the gluing guide, and hang the sign from its hole.
What’s in the file
- Layered: the round back plate, the white ring with the hill, the koala, its tummy, inner ears and nose, the eucalyptus sprigs with the branch it holds, and the name.
- One piece: a single plate with the koala scene engraved and the name engraved or cut free in the sky.
- Gluing guide (optional, layered): where each piece sits on the plate.
- Mount: a hanging hole, a base plate with slots for your sheet, or none.
- SVG for every laser: the cut lines red, the score lines and the engraving blue, the gluing guide green, each on a layer of its own, true to size.
- PNG for raster engraving: the engraving alone - the score lines, the engraved areas and the gluing guide black on transparent at 600 dpi, as large as the sheet, so imported true to size it lies exactly on the SVG’s cut lines.
- PDF to print and proof: the same lines as vectors, true to size, every kind of line on a layer of its own - printed at 100 %, it shows the real size.
- AI for Illustrator: the same file as the PDF, which Illustrator opens as its own document, every kind of line on a layer of its own.
- DXF for CAD programs and RDWorks: the lines on the layers CUT, SCORE, ENGRAVE and GUIDE, in mm.
- STL to 3D print the design: the pieces as solids at their thickness - with several parts a ZIP with the whole piece and one STL per part.
- With Batch, several names at once: a ZIP with one file per name, or one sheet with all of them.
Questions
Which colors does the 3D view use?
A sage green plate, gray for the koala with a white tummy, pink inner ears and a charcoal nose, moss green eucalyptus and branch, and white for the ring, the hill and the name.
Are the koala’s pieces cut along the drawing?
Yes. Every shape the line drawing closes - the head with the ears, the tummy, each inner ear, the nose - is a piece of its own, each eucalyptus sprig one piece with its leaves, and the lines between them show the plate below.
How many letters fit in the sky?
Up to 12; a short name is set large above the koala, a long one a little smaller.
Can it be cut from one plate?
Yes. Under One piece, Engraved burns the whole drawing and the name into a single plate, and Cut out removes the sky so the name stands on its own, joined to the ring and the scene.
Can I make one for every name on a list?
Yes. Choose “Batch” above the first text and paste your list, one piece per line, up to 100. Every line becomes its own piece: download a ZIP with one file each, or one sheet with all of them.
More laser cut files
All laser cut files-
Sleepy Whale Name Sign
A little whale asleep on the sea floor, the name in a script above.
-
Sleeping Fawn Name Sign
A fawn asleep between flowers, the name in a script above.
-
Baby Lion Name Sign
A smiling baby lion among jungle leaves, the first and last name below.
-
Balloon Bear Name Sign
A hot air balloon with the name on a cloud and a little bear in the basket.